Hewitt Decking



QT Powder Coated All-Aluminum

Extruded aluminum decking that offers superior strength, low weight and corrosion resistance. Incorporates sound deadening material and a baked on beige or white finish for a durable nonskid surface.


  • Baked-on powder coated finish that is resistant to scratching, peeling, fading and wear.
  • Lightweight.
  • Corrosion resistant.


  • Extruded 3/4” design for superior strength.
  • Non-skid surface.
  • Sound deadening material installed to insure a quiet deck.
  • Extrusion widths are 8”, 9.6”, and 12”.
  • Standard length is 16’ – available in 24’ lengths.
  • Available in white or beige.


  • Bracing recommended every 24” – Maximum span of 30”.


  • 5 year conditional warranty (excluding paint).



A traditional favorite. Solid, durable wood that is naturally weather resistant. 5/4″ radius smooth planks provide good footing, wet or dry.


  • Western Red Cedar is one of the few wood species that are naturally weather resistant. Its resistance to moisture, decay and insect damage make it the ideal choice for a surface that is exposed to sun, rain, heat and cold all year round.

Easy Finishing

  • Because cedar is virtually pitch and resin free, the wood easily accepts a range of finishes, from fine oils and stains, to solid coatings and paint. When properly finished, Cedar will last for decades even in harsh environments.

Dimensional Stability

  • Western Red Cedar has twice the stability of most commonly available softwoods. The stability is a result of its low density and shrinkage factors. It lies flat, stays straight, and holds fastenings tightly.


A waffle-weave textured panel with a heavy-duty phenolic overlay. Skidguard provides a continuous, no-gap surface that is highly resistant to peeling or chipping. It offers excellent traction when wet. (Only available on 2′-4′ and 8′ wide docks.)


  • Skidguard is a waffle-weave textured panel ideal for slip-resistant footing.
  • Skidguard is constructed of exterior grade plywood and a heavy-duty phenolic overlay attached with 100% waterproof glue that maintains integrity under the most severe moisture conditions.
  • The overlay consists of a heavy fiber sheet, thoroughly impregnated with a special formula phenolic resin. This overlay is bonded to the panel face under heat and pressure so that it actually becomes a part of the panel itself. It will not peel or chip away.
  • The traction pattern is deeply embossed into the surface during the manufacturing process. As the thermo-setting resin cures, the rough textured screen grid hardens into a permanent, wear-resistant surface.


  • The heavy-duty overlay surface of Skidguard will wear for years under normal residential foot traffic.


  • Skidguard is warm in color, and the pleasingly textured surface eliminates sun glare associated with smooth surfaces, thus providing a pleasant setting for outdoor activities.


  • Skidguard is made to resist weathering. The overlay will not check or peel, even under adverse weather conditions.
  • The only change you will notice is a gradual darkening to a rich amber color caused by long exposure to sunlight.


A reinforced polypropylene finished decking system designed for easy assembly that requires no maintenance. Its strong, durable lightweight design makes for a perfect finish on our docks. ThruFlow allows water and debris to fall through your dock surface

ThruFlow is designed to be the finished decking for a dock, deck, patio or any outside or inside flooring structure. It is also designed to be used in conjuction with metal, wood, aluminum or other similar substructures


  • Totally maintenance free
  • UV and static electricity protection
  • Superior load bearing capability
  • Non-slip surface, even when wet
  • Strong, durable and lightweight
  • 1’ wide panels, available in 3’, 4’, and 5’ lengths
  • Pre-drilled & countersunk for easy installation
  • Allows sunlight, water and debris through
  • Stays cool to the touch, even in hot sun
  • ACE approved in florida
  • ADA compliant
  • Helps minimize storm surge and wave effects
  • Available in white, beige and special order for grey


  • We recommend high quality screws, such as #10 or #12, pan head stainless steel screws for longevity.
  • Pre-drilling is not required, as the holes are molded-in with a countersink for your convenience.
  • Screws should be clear through the panel and fastened in to the structure of your frame.
  • Remember not to tighten the screws down to allow for expansion or contraction.


  • 12 years

There are no products listed under this category.

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks